|
Overview
Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.
Product Specifications
Wingspan: 38.75 in (985mm)
Overall Length: 34 in (865mm)
Wing Area: 325 sq in (21 sq dm)
Flying Weight: 22 - 25 oz (625 - 710g)
Motor Size: Park 400 Inrunner or Park 450 Outrunner
Radio: 4-channel or greater (7-channel for quad flaps)
Servos: 4 sub-micros (6 sub-micros for quad flaps)
Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White
CG (center of gravity): 2.50 in (63mm) behind the leading edge
Prop Size: 10x7 - 11x7
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po
Flaps: Yes (optional)
Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
Approx. Flying Duration: 10-20 minutes
Scale: Park Flyer
Approx. Assembly Time: 1-2 hours
Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner
Needed to Complete
* Sport Outrunner Setup
* High Power Setup (using gearbox)
* Quad Flap Setup
Required Electronics and Common Accessories
Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA
Propeller
|
